admin@rothmancompressor.com 
0086-13663713257
Air compressor operating rules
Air compressor is one of the main mechanical power equipment of many enterprises, and it is very necessary to maintain the safe operation of air compressor. Strict implementation of the air compressor operating procedures will not only help extend the service life of the air compressor, but also ensure the safety of air compressor operators. Let’s take a look at the air compressor operating procedures.
1. Before operating the air compressor, you should pay attention to the following issues:
1. Keep the lubricating oil in the oil pool within the scale range, and check that the amount of oil in the lubricator should not be lower than the scale line value before the air compressor is operated.
2. Check whether each moving part is flexible, whether each connection part is tight, whether the lubrication system is normal, whether the motor and electrical control equipment are safe and reliable.
3. Before operating the air compressor, check whether the protective device and safety accessories are intact and complete.
4. Check whether the exhaust pipe is unblocked.
5. Connect the water source and open the water inlet valves to make the cooling water unblocked.
2. During the operation of the air compressor, it should be noted that before the first start after long-term inactivity, it must be cranked for inspection, and pay attention to whether there is any impact, jamming or abnormal noise.
3. The machine must be started in a no-load state. After the no-load operation is normal, the air compressor is gradually put into load operation.
4. When the air compressor is in operation, after normal operation, you should always pay attention to the readings of various instruments and adjust them at any time.
0086-13663713257
admin@rothmancompressor.com