Home
>
News

What are the air compressor air control components?

1. The loading solenoid valve is a two position two normally closed solenoid valve. Mainly through the power on and power off of the solenoid valve, to control the on and off state of the gas path, to achieve the main functions of loading and unloading.

2. When the vent valve is unloaded or shut down, it means to open, to release the pressure in the oil and gas tank, so that the air compressor can operate at low load, or restart under the condition of no load.

3. Inverse ratio valve It will work only when the set regulating pressure is exceeded. At this time, the higher the proportional valve (mainly refers to the exhaust pressure of the system), the lower the output control pressure will be, and the lower the control pressure will be. The opening of the intake unloading valve disc controlled by the cylinder expansion will be smaller, so that the air intake of the air compressor will be smaller, and the air supply and consumption of the air compressor will be kept at the same level When the valve is in a state of balance, it will realize the regulation function of non-polar gas flow. The way to set the regulation pressure is to lift up the black cap of the inverse proportional valve and rotate it. When the valve is rotated clockwise, the pressure will increase, and when it is rotated counterclockwise, the pressure will decrease. After setting, press down the black cap to prevent it from rotating automatically due to vibration. Generally, the set value needs to be less than the specific exhaust pressure. If it is higher than the unloading pressure set by the microcomputer controller, there will be only empty and loaded vehicles without capacity adjustment.

4. Sensor pressure and temperature sensors are used to realize the measurement of various parameters and realize the loading and unloading of the air compressor and the prompt of various faults. If necessary, they will stop automatically.

Pre: What is the relationship between cleanliness and compressor? Next: Why the air compressor cylinder will wear early?